Thursday, February 5, 2009

fffffffffffffffffffffuuuuuuuuuUUUUUUUUUUUUUCCCCCCCCCCCKKKKKKKKKKKK

so..

I just bricked or fuXXored the Linksys WRT54G Version 6.0 router.
Turns out I have the "neutered" model..only has like 2MB of RAM..instead of the usual 4MB.

I've flashed and re-flashed the damn thing..so now I get to take it apart and short out 2 pins..
just what I wanted to do.
Posted by at

3 comments:

  1. AndiMACFebruary 5, 2009 at 5:35 AM

    Ugh! Better you than me!

    ReplyDelete
  2. DougFebruary 5, 2009 at 5:08 PM

    I'm on my fourth modem/third router in ten years, if you count the one wired router I used five years ago. Bell replaced my 2nd modem with a wireless router/modem, and that eventually died, and they gave me another wr/m last year. What I like about Bell DSL is the fact that their modems are all wireless routers now, too.

    What were you tyring to cram into that 2MB? :-)

    ReplyDelete
  3. AK™February 5, 2009 at 7:47 PM

    Linux firmware..
    so I could boost the radio signal for the wireless..
    turns out I had to use the Micro size firmware instead of the mini size..

    ReplyDelete

Why So Serious?

;)

Subscribe to: Post Comments (Atom)